| CENTER SECTION HEIGHT | 11.440 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.120 INCHES NOMINAL |
| CENTER SECTION WIDTH | 15.250 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 3.125 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| FIRST LEG HOLE DIAMETER | 0.436 INCHES MINIMUM AND 0.443 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 4.500 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 4.500 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.750 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.120 INCHES NOMINAL |
| FIRST LEG WIDTH | 15.250 INCHES NOMINAL |
| FIRST LEG LENGTH | 7.620 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A366 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A569 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 1009 |
| MOUNTING HOLE TYPE | PLAIN |
| REINFORCEMENT METHOD | GUSSET |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 3.500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 4.580 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG HOLE DIAMETER | 0.436 INCHES MINIMUM AND 0.443 INCHES MAXIMUM |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 6.090 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.620 INCHES NOMINAL |
| SECOND LEG THICKNESS | 0.120 INCHES NOMINAL |
| SECOND LEG WIDTH | 15.250 INCHES NOMINAL |
| SECOND LEG LENGTH | 14.000 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| STYLE DESIGNATOR | DOUBLE ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-T-704,TY F MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PAINT |