5340-01-077-9801, BRACKET,DOUBLE ANGLE

National Stock Number:
5340-01-077-9801

Federal Supply Class:
5340

National Item Identification Number:
010779801

Description:
BRACKET,DOUBLE ANGLE

Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.

Manufacturer Information:

12252373

19207

U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM

Techincal Specification:

CENTER SECTION HEIGHT	0.680 INCHES NOMINAL
CENTER SECTION THICKNESS	0.1793 INCHES NOMINAL
FIRST LEG ANGLE	90.0 DEGREES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.500 INCHES NOMINAL
FIRST LEG HOLE ARRANGEMENT STYLE	TWO HOLES
FIRST LEG HOLE DIAMETER	0.280 INCHES MINIMUM AND 0.290 INCHES MAXIMUM
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH	1.000 INCHES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.750 INCHES NOMINAL
FIRST LEG STYLE	SQUARE
FIRST LEG THICKNESS	0.1793 INCHES NOMINAL
FIRST LEG WIDTH	2.000 INCHES NOMINAL
FIRST LEG LENGTH	1.5093 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	STEEL
SECOND LEG ANGLE	90.0 DEGREES NOMINAL
SECOND LEG HOLE ARRANGEMENT STYLE	ONE HOLE
SECOND LEG HOLE DIAMETER	0.280 INCHES MINIMUM AND 0.290 INCHES MAXIMUM
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH	0.500 INCHES NOMINAL
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH	0.440 INCHES NOMINAL
SECOND LEG THICKNESS	0.1793 INCHES NOMINAL
SECOND LEG WIDTH	0.880 INCHES NOMINAL
SECOND LEG LENGTH	1.6193 INCHES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEG	NOT IDENTICAL
SECOND LEG STYLE	SQUARE
STYLE DESIGNATOR	DOUBLE ANGLE

Click here to Register for Free 30-day Trial