5306-01-474-1086, BOLT,SHEAR

2840-01-474-1085 BLADE,TURBINE ROTOR,AIRCRAFT GAS

5330-01-474-1087 SEAL,NONMETALLIC SPECIAL SHAPED

National Stock Number:
5306-01-474-1086

Federal Supply Class:
5306

National Item Identification Number:
014741086

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

MS21134-03005	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS21134-03005	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

CRITICALITY CODE JUSTIFICATION	AGAV
EXTENDED WASHER DIAMETER	0.349 INCHES MINIMUM AND 0.359 INCHES MAXIMUM
EXTENDED WASHER THICKNESS	0.017 INCHES MINIMUM AND 0.037 INCHES MAXIMUM
FASTENER LENGTH	0.706 INCHES MINIMUM AND 0.736 INCHES MAXIMUM
GRIP LENGTH	0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
GRIP DIAMETER	0.188 INCHES MINIMUM AND 0.189 INCHES MAXIMUM
HARDNESS RATING	39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.195 INCHES MINIMUM AND 0.215 INCHES MAXIMUM
HEAD MINOR DIAMETER	0.173 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
HEAD STYLE	SPLINE EXTENDED WASHER
PART NAME ASSIGNED BY CONTROLLING AGENCY	BOLT,SHEAR.AIRCRAFT
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5626(AISI 4140) MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-5000(AISI 4340) MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6049(AISI 8740) MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-8503(AISI 6150) MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OR STEEL COMP 6150 OVERALL
MINIMUM TENSILE STRENGTH	180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.190 INCHES
SPECIAL FEATURES	WRENCHING ELEMENTS - 8; ULTIMATE TENSILE STRENGTH - 3910 LB/MIN; DBL SHEAR STRENGTH - 6100 LB/MIN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.378 INCHES MINIMUM
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
THREAD QUANTITY PER INCH	32

Click here to Register for Free 30-day Trial