| MATERIAL | STEEL COMP E52100 BALL |
| STEEL COMP E52100 INNER RING |
| STEEL COMP 4130 OUTER RING |
| PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
| STEEL COMP 4130 SHAFT |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL |
| MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| AMS 3652 ASSN STD SINGLE MATERIAL RESPONSE OR |
| AMS 3666 ASSN STD SINGLE MATERIAL RESPONSE SEAL |
| MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE SHAFT |
| STYLE DESIGNATOR | DOUBLE ROW, STAGGERED, BALL |
| SHANK STYLE | EXTERNALLY THREADED |
| ALIGNMENT TYPE | SELF-ALIGNING |
| SURFACE TREATMENT | CADMIUM OUTER RING |
| CADMIUM SHAFT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE SHAFT |
| SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| OVERALL LENGTH | 2.5050 INCHES MINIMUM AND |
| 2.5250 INCHES MAXIMUM |
| BORE DIAMETER | 0.1897 INCHES MINIMUM AND |
| 0.1900 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 0.9590 INCHES MINIMUM AND |
| 0.9790 INCHES MAXIMUM |
| OUTER RING WIDTH | 0.3920 INCHES MINIMUM AND |
| 0.4070 INCHES MAXIMUM |
| INNER RING WIDTH | 0.4950 INCHES MINIMUM AND |
| 0.5000 INCHES MAXIMUM |
| LENGTH FROM BORE CENTER TO SHANK END | 2.0210 INCHES MINIMUM AND |
| 2.0410 INCHES MAXIMUM |
| SHANK DIAMETER | 0.3750 INCHES NOMINAL |
| SHANK THREAD LENGTH | 1.2820 INCHES MINIMUM AND |
| 1.3440 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNJF |
| NOMINAL THREAD SIZE | 0.375 INCHES |
| THREAD QUANTITY PER INCH | 24 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| SEAL QUANTITY | 2 |
| BEARING SEAL TYPE | CONTACT |
| SELF-ALIGNMENT LOCATION | INTERNAL |
| LUBRICATION MATERIAL | GREASE |
| SPECIAL FEATURES | HEAT STABILIZED FOR OPERATION AT 250 DEG FAH |